Jody Posted March 1, 2019 Share Posted March 1, 2019 I recently bent the 36 tooth cog on my Eagle NX Cassette and am not sure how to proceed. I have been told a screw drive and a hammer are my best options but there has to be a better approach. A new cassette is not an option at this time. Quote Link to comment Share on other sites More sharing options...
Administrators SickBiker Posted April 21, 2019 Administrators Share Posted April 21, 2019 On 3/1/2019 at 8:06 PM, Jody said: screw drive and a hammer I don't think, that the hammer would be a good idea, but trying to bend the sprocket slowly, maybe using pliers might work. It's steel, so there is a hope for you Quote Link to comment Share on other sites More sharing options...
RePli Posted March 12, 2021 Share Posted March 12, 2021 don't worry, pry with a flat screwdriver in btw 2 cogs and bend the tooth on the larger cog in or the cog on the smaller one out, depending which you need. BE gentle and try correcting in small steps rather than going too far... 🙂 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.