Administrators SickBiker Posted January 16, 2018 Administrators Share Posted January 16, 2018 How to remove, overhaul and install the Sram XX1 Eagle rear derailleur. There are a view steps, were you can make a mistake... Quote Link to comment Share on other sites More sharing options...
Bikinbill Posted April 14, 2019 Share Posted April 14, 2019 I don't have the adjustatnigy (red plastic piece). How do I adjust it with out it? Quote Link to comment Share on other sites More sharing options...
Administrators SickBiker Posted April 21, 2019 Author Administrators Share Posted April 21, 2019 On 4/14/2019 at 4:57 AM, Bikinbill said: red plastic piece I highly recommend, that you get one. it not only sets the sprocket - pulley distance, but also the front - back position of the rear derailleur. Quote Link to comment Share on other sites More sharing options...
TPinDe Posted January 18, 2020 Share Posted January 18, 2020 I’m trying to work out my 10-50 Jeffsy after it wasn’t properly setup. I have the gears running through the full range, but the 42 continues to be a problem. It jumps and skips, no matter how I adjust the B screw in 1/4 turn increments. Any ideas? Is this a cable tension issue? Thanks., Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.