Jump to content

Straighten a bent Cog on an Eagle NX cassette


Recommended Posts

I recently bent the 36 tooth cog on my Eagle NX Cassette and am not sure how to proceed.    I have been told a screw drive and a hammer are my best options but there has to be a better approach.  A new cassette is not an option at this time.

EagleNXBentCog.jpg
Link to post
Share on other sites
  • 1 month later...
  • Administrators
SickBiker
On 3/1/2019 at 8:06 PM, Jody said:

screw drive and a hammer

I don't think, that the hammer would be a good idea, but trying to bend the sprocket slowly, maybe using pliers might work. It's steel, so there is a hope for you :)

Link to post
Share on other sites
  • 1 year later...
RePli

don't worry, pry with a flat screwdriver in btw 2 cogs and bend the tooth on the larger cog in or the cog on the smaller one out, depending which you need. BE gentle and try correcting in small steps rather than going too far... 🙂

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...